The Vibra Pro Genesis Sport X3 is an entry level premium dual motion vibration exercise machine. It provides a wide range of focused vibration therapy because the dual motors offer both premium oscillation motion and spiral rotational motion which can be operated separately or combined.
Utilizing a dual motion system of separate oscillation motion and separate spiral rotational motion or combining both motions to create a triplanar motion, this machine can do it all. The Vibra Pro Genesis Sport has 2 different motors and 2 separate mechanical drive systems that are completely independent of one another. The oscillation motion can provide benefits not found with the spiral rotational motion, and the spiral rotational motion can provide benefits not achieved by the oscillation motion. This one machine can do the work of 2 different machines.
The Vibra Pro Genesis Sport uses a column made with carbon fiber material and the logo is silkscreen printed onto the column. Many other machines on the market use a flimsy acrylic panel and simply put a sticker on the column with their company logo. The stickers not only look cheap and unattractive but they tend to start peeling from the corner or get scratched very easily, whereas carbon fiber material is very durable and long lasting, maintaining its original appearance for many years.
The Vibra Pro Genesis Sport machine comes with the typical stretchy bungee style upper body straps used for adding cardio exercises to your workout and it comes with another set of more rigid straps that attach to the moving section of the platform and are used for transferring the vibrations to the upper body, arms, neck, back and shoulders. Competitors machines only come with one strap system and in rare cases will come with 2 sets but the machine only has one mounting location so the 2 straps can't be used at the same time. The Genesis Sport has 2 dedicated mounting locations to allow the user to have both types of straps connected and ready to use at any time.
The unique handlebar system on the Vibra Pro Genesis Sport was designed to be usable by many different sized users. It’s very important to have handles that keep you centered and balanced over the platform without over reaching, which can place undue strain on the users back. The patented “X Bar” handle system on the Vibra Pro Genesis Sport is angled back and up to accommodate users from 4’6” to 6’6” in height.
Vibra Pro Genesis Sport utilizes double dipped rubber epoxy coated handles. Unlike the cheap open cell foam used by competitors, the rubber dipped epoxy material does not peel, cannot be easily cut and will not twist around the handles. Having a completely closed cell structure the epoxy coating is impervious to water and will not absorb perspiration eliminating any chance of allowing bacterial growth on the handlebars.
One of the highest wear areas on a vibration machine is the skirt section surrounding the base of the platform. This location is typically subjected to kicking, scraping and scuffing. Though most machine manufacturers use inexpensive blow molded plastic for the skirt, Vibra Pro made the decision to utilize a heavy steel one piece skirt welded to the rest of the base. Powder coated painting process and clear coating after painting keeps the appearance looking like new for many years. Virtually impossible to crack or damage, this skirt is built to last. The added weight of the steel skirt also helps stabilize the machine and aid in properly focusing the vibration from the machine.
The driving force behind the Genesis Sport is its Duraframe dual motor system. Vibra Pro re-engineered their motor to use 35% less energy yet still produce 25% more torque. Internal air cooling systems in our Power Tech motors run cooler than traditional motors, increasing their usable life by more than 50%.
To ensure years of trouble free use, Vibra Pro electronic motherboards are double soldered, which guarantees continuous electrical contact to sensitive electronic components, which could otherwise deteriorate over time or come loose under continuous vibrations produced by the equipment. Competitors products use single soldered boards to lower production costs at the expense of reliability.
Vibra Pro installs electric cooling fans on their motherboards to lower internal operating temperatures by as much as 30%, which increase the effective life span of the machine by 90%. Competitors units will use the less expensive un-cooled electronics which tend to fail on 40% of their machines within the first 2 years.
Vibra Pro's patented Power Tech electric motors are exclusive to the Genesis Sport machine. Power Tech motors use DC current which have far less EMP than cheaper AC motors that are used by our competitors. High level electro magnetic fields have been proven to be health hazards by the World Health Organization.
All Vibra Pro Genesis Sport machines are calibrated before packaging to ensure that all vibration energy produced by the machine is pure harmonic vibration. This process completely eliminates any stray non-sinusoidal transient energy from being transferred to the user, completely negating any chance of soft tissue or joint damage.
Vibra Pro machines are pre-assembled at the factory and tested and calibrated then slightly dismantled for packaging. This ensures that the parts will fit together properly when it arrives at your home. All tools required for the assembly are also provided in the box. Additionally, the machine ships with a full color, full page owners manual with simple to understand photos of the assembly process.